SUN Managers,
Error "U4" on SPARCprinter mean:
>> Error Code Meaning Action
>> ------------------------------------------------------------------
>> U4 on The fuser Turn the power swith off,
>> has failed. then on. If the error
>> persists, consult Sun
>> customer support.
Thanks to:
Birger A. Wathne (Birger.Wathne@vest.sdata.no)
Shouben Zhou (zshouben@PCS.CNU.EDU)
Andy Kumeda (kumeda@dt.wdc.com)
Gerry Dunnion (gdunnion@nova.ucd.ie)
Randy Finch (randy@goofy0.ssd.lmsc.lockheed.com)
Thank you.
regards
rosley@ksm.my
-------------------------------------------------------------------------------
______ ______
/ / / /
/ / / / Mohd Rosley Omar KOMPUTER SISTEM MALAYSIA
/ / / / e-mail: rosley@ksm.my 8 Jln 13/6
_____ / / \ \ systems engineer 46200 Petaling Jaya
| |\ \ \ \ systems administrator Selangor D E
| | \ \ \ \ MALAYSIA
| | \ \ / / Tel: 603-756 9666
|_____| \_____\/_____/ Fax: 603-756 9879 (MOSAIC) http://ksm.my
===============================================================================
ORIGINAL QUESTION:
I have a SPARCprinter connected to SparcStation 10 running SunOS 4.1.3
after cancelling one huge print job, and OFF-ON the SPARCprinter,
the display panel at SPARCprinter display "U4" and there's no light
on all the 5 status light, and when I send a printjob, it queue, and
after that just dissappear with no printout.
has anybody faced this type of problem before ?
(for your information, I can't find the SPARCprinter Manual)
===============================================================================
ANSWER:
Error Code Meaning Action
------------------------------------------------------------------
U4 on The fuser Turn the power swith off,
has failed. then on. If the error
persists, consult Sun
customer support.
I believe there is a panel in the front of the SPARCprinter where
the fuser resides. You can probably order and replace the part
yourself.
Good Luck.
-randy
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:09:11 CDT