Thanks for the responses, there was a lot of them.
The problem was not logging in as root, I was using my own account, the
problem was with the configuration.
The "Desktop SPARC Hardware Owner's Guide" stated, in Appendix B, page 65:
Then set the options as follows:
- 7 data bits per character
- 1 stop bit
- Even parity
- 9600 baud
- XON/XOFF enabled
So I did it, and the login message appeared, but after a few test I
realize that the ENTER was translated to "\250" or something like that.
Then I did a change the settings and tested, again and again... The only
setting that worked was:
7 Bits, Space Parity, 1 Stop Bit.
That was all the promblem! :)
Again, thanks.
Here is the original post:
> Sun Managers:
>
> I've tried to attach a vt220 terminal to our SPARCclassic. First I used
> 'admintool/Serial Port Manager' and I got the "login:" prompt in the
> terminal, but I can't log in, got always the same: "Login incorrect", and
> I did not forget my password, it works well on the console.
>
> I think everything is ok:
>
> $ sacadm -l
> PMTAG PMTYPE FLGS RCNT STATUS COMMAND
> tcp listen - 0 ENABLED /usr/lib/saf/listen tcp #
> zsmon ttymon - 2 ENABLED /usr/lib/saf/ttymon #Serial
>
> $ pmadm -l4
> PMTAG PMTYPE SVCTAG FLGS ID <PMSPECIFIC>
> zsmon ttymon a u root /dev/term/a - -
> /usr/bin/login - 9600 ldterm,ttcompat login: - vt220 n # Terminal -
Hardwired
>
> It is running Solaris 2.4 whith no patches.
>
> Any help will be appreciated. I will summarize.
----------------------------------------+--------------------------------------
Luis Carlos Castro Skertchly | e-mail: luis@sunulsa.ulsa.mx
Coordinador de Sistemas UNIX | http://www.ulsa.mx/home-page.html
Laboratorios de Cómputo de Ingeniería |
Universidad La Salle, A.C. | Teléfono: (5)516-9960 al 69 Ext. 2243
Benjamín Franklin No. 47 Col. Condesa | (5)728-0500
México, D.F. | Fax: 271-8585
----------------------------------------+--------------------------------------
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:51 CDT