First, let me say thank you to all those who responded to my posting.
My original question:
> For reasons which I will not elaborate on, I am trying to use a
Windows >NT workstation as a print server for a Solaris 2.5.1 machine
(Ultra). I am >able to print text files to the desired printer (HP DeskJet
1600CM) with no >problems; however, if I try to print a graphics file (TIFF)
the NT box sends >the file to the printer as a very long text file.
>
> The problem, I believe, is that the lp client on the Solaris box is
>sending either a f, o, or p control command to the NT box which takes the
raw >file and assigns it the TEXT datatype. I have searched through the
answerbook >and other sources and have not been able to determine how to
configure lp so >that it will send the proper control command. My question
is does anyone know >how to tell lp to send the correct control command or
even if it is possible.
Summary:
One suggestion was to install the SunSoft print client
(http://www.sun.com/smcc/solaris-migrations/tools/tools.html) which has
better functionality than lp. I have not tried this option yet but I am
going to just to see how well it works.
The other suggestion I received from a couple of individuals was to
use /usr/ucb/lpr -l -Pprintername. This is the option I tried and it worked
perfectly.
Apparently Microsoft is aware of this issue and you may be able to
find more information on it in their knowledge base.
Thanks Again,
****************************************************************
Leo Crombach
System and Network Administrator
Tropel Corporation
60 O'Connor Road
Fairport, New York 14450
(716)388-3566
lcrombach@tropel.com
****************************************************************
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:49 CDT