Thanks to those who replied:
David Schiffrin
Jeremy Olsen
Ray Trzaska
Marc S. Gibian
Rudy Yu
The Original question:
> This is mainly a CYA thing before I order a DLT7000 tape drive- I am
> pretty certain you can... Can you put a Fast Wide Single ended device
> like the DLT7000 on a Fast "Narrow" Single ended SCSI bus like the
> standard one on a Sparc 5? This is a temporary installation until the
> Ultra comes to us in the fall.
>
> Thanks!!!
The Answer:
Yes you can hook up this Tape drive to a F/N/S scsi bus - just get a
50 - 68 pin cable, address is from 0 - 6. I will probably make it the last
device, and terminate it with a 68 pin terminator.
One person reminded me that I can get a F/W/S scsi sbus card, but I am trying
to avoid that cost sice the Ultra I hope to get will come with this interface.
Thanks again!
============================================================================
|Charles Mengel |
|Systems Eng Manager | ________________
|LGI | | _____ _ |
|10450 Shaker Drive Suite 208 | |/ \ * / / |
|Columbia Maryland USA 21046 | \ | | |____
|VOICE 410-997-1393 | \ | | |
|FAX 410-720-1241 | |_| | /
|EMAIL charles.mengel@lgi.com | \___|
|WEB www.lgi.com | Fixed Width Font Test
| Hope this looks like Maryland!!!
=============================================================================
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:50 CDT