ORIGINAL PROBLEM:
On a SPARC 2 that stopped working, and whose monitor is blank when I power up.
When I attach a vt100 and power up the unit, I get the following
204 ***
PMAP = 00e3000, Exp = 00000000, Obs = 80000000
CAUSE:
Motherboard failure
FIX:
$200 Sun SPARC 2 base (pizza box, power supply, motherboard, including NVRAM
and CPU,
no hard drive, no memory, 1 floppy)
http://www.request-tech.com/
REFERENCE:
comp.sys.sun.wanted
Thanks to the responders. The following notes indicated that
I should get a new motherboard.
greg
_______________________________________________________________
From: Kevin.Sheehan@uniq.com.au (Kevin Sheehan {Consulting Poster
Child})
Boot prom power up diags. It is telling you that a particular
page map (part of the MMU) looks like it has a stuck bit, which
is Very Bad, as that is static RAM that isn't socketed like SIMM.
That's from memory (pardon the pun) as the sun4c are the last of
the old static MMU machines.
l & h,
kev
_______________________________________________________________
From:
bismark@alta.jpl.nasa.gov (Bismark Espinoza)
I saw the exact problem with my sparc2.
The tech came by and replaced the motherboard.
But then a co-worker said the tech had said something
about two wires touching.
My sparc 2 works fine now.
_______________________________________________________________
_______________________________________________________________
Greg Polanski greg_polanski@adc.com
ADC Telecommunications, Inc.
MS 254 612-946-2270
PO Box 1101 612-946-3910 FAX
Minneapolis, MN 55440-1101 612-580-6873 Pager
_______________________________________________________________
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:12:03 CDT