First, thanks to igor@mainsoft.com (Igor Khurgin) who wrote:
------------------------
Steve,
You have to install:
SUNWqfed Sun Quad FastEthernet Adapter Driver
SUNWqfedu Sun Quad FastEthernet Adapter Driver
And then configure your qfe interfaces to work on 10mb only.
Regards,
Igor
------------------------
and Toshio_Kumagai@kumasan.org (Toshio Kumagai) who wrote:
------------------------
Hi Steve,
I remember that somebody have got luck for BigMac ethernet I/F
on Sol7 with Sol2.6 driver.
I think qec driver for 2.6 might work on Sol7 :-)
Good luck.
Toshio Kumagai
------------------------
Okay, I am honestly confused because now it is working... No system reboot,
nothing. And I
know for a fact that the system is idle and has been idle all day.
FYI, Igor, I had the packages SUNWqfed[u] installed already from the OS
installation process.
I don't know what happened. Sorry to waste your time.
-Steve
Original message:
I have a Quad 10 megabit ethernet controller card installed on my Ultra 1.
I had it working fine under Sol 2.6. I just freshly installed Sol 7 and
my ethernet connections on the card didn't work... After I convinced myself
that I wasn't setting up the port wrong, I typed 'prtconf' and got:
qec (driver not attached)
qe (driver not attached)
qe (driver not attached)
qe (driver not attached)
qe (driver not attached)
Then I checked the installed packages and found that the only drivers for
QUAD ethernet cards are for the 100 megabit quad cards. I did a FULL
install so I have all possible drivers that come with the install media.
("Entire distribution plus OEM support" install option).
Does anyone know where I can get the drivers for this card under Solaris 7?
Thanks in advance and I will summarize!
-Steve
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:13:16 CDT