SUMMARY: Two video cards under ULTRA 5 / Solaris 7
Thanks to:
Roger Fujii <rmf@unixbox.lookhere.com>
David Kleiner <kleiner@mbtsnfs1.mbs.mbtsprod.ml.com>
"Hall, Johnny" <johnny@pahv.xerox.com>
It works... now we have two PCI cards working on our ULTRA-5 machine.
Thanks guys...
Roger Fujii <rmf@unixbox.lookhere.com>
First, do a "touch /reconfigure" and reboot. This should create the
device nodes.
After the reboot, check /dev/fbs. You should see 2 entries. If you do,
then /dev/fb0 points to the primary display, and /dev/fb1 points to the
secondary. If not, see if there is an updated openprom for the ultra5.
If you do see 2 devicees, configure the secondary screen by using
m64config (so you should type a command like: m64config -dev /dev/fb1
-res 1280). Don't use a resolution that can't be handled by your
monitor.
If you are using CDE, copy /usr/dt/config/Xservers to
/etc/dt/config/Xservers and change it by adding a line like:
:0 Local local_uid@console root /usr/openwin/bin/Xsun -dev
/dev/fb0:/dev/fb1 -nobanner
If you are using openwin, see the openwin man page on starting up
multiple monitors.
and you should have 2....
David Kleiner <kleiner@mbtsnfs1.mbs.mbtsprod.ml.com>
Conner,
Try this in your /etc/dt/config/Xservers:
:0 Local local_uid@console root /usr/openwin/bin/Xsun :0 -dev
/dev/fb0 defdepth 24 defclass TrueColor -dev /dev/fb1 left defdepth 24
defclass TrueColor -nobanner
i.e. two X servers running on two frame buffers, true color etc.
Hope this helps,
David Kleiner
"Hall, Johnny" <johnny@pahv.xerox.com>
Copy this file..
/usr/dt/config/Xservers
to
/etc/dt/config/Xservers (/etc/dt may not exist, in that case you will
have to create it.)
add lines at the end similar to this
:0 Local local_uid@console root /usr/openwin/bin/Xsun :0 -dev
/dev/fbs/gfxp 0 -dev /dev/fbs/m640
Except specify your /dev/fbs/whatever
Johnny
>
> ULTRA 5, SOLARIS 7
> 128 RAM
> TWO FRAME BUFFERS INTERNAL PCI
>
> I just purchased an ULTRA 5, It has a built-in >video(frame)buffer.
> It comes with a 3D RAGE II+DVD (215GT2VB23) BAV61 >(974955). I have
an
> additional additional (PCI) buffer, it is a 3D RAGE >II+DVD
(215GT27B23)
> BBW72 (9752SS). What is the configuration for using >the two buffers
> with two SUN monitors on the one machine. Is this doubable and what
> are the steps required?!
> Conner McCleod
>
> ps. I checked the archives at: >http://www.dataman.nl/showsunman.lp
> and did not find anything useful.
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:13:20 CDT