I asked:
> I have a Ultra 5 that has a vertical board with three PCI slots.
> I have two SCSI card, Antares Wide SCSI adapter, and Sun differential
> SCSI adapter.
>
> ok> probe-scsi-all
> only shows
> pci@...
> but not any device. The disks, floppy, CDROM works fine. It boots up
> ok.
>
> The system is under warranty. How can I find out what piece of hardware
> is the problem, so that I can get a replacement? Thanks.
It was my fault. I made a mistake that who is the singled ended
scsi controller, who is the differential scsi controller. I mixed
up the type of device with the controller. After checking this and
that, finally I checked the basic, sigh ...
But during the checking, I found:
==
ok show-post-results
Status 0=Pass, Non-Zero=Fail (%o0): 0
Message String (%o1):
Board Descriptor (%o2): 233330200001b
==
What does this mean? Thanks.
Michael Wang
http://www.mindspring.com/~mwang
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:02 CDT