hi all,
Thought this would be helpful the SA who are building the Sun Cluster
for OPS.
All/any corrections tips are welcome ...
Thanks
--------------------------------------------------------------------
PLEASE DO FOLLOW ALL THE STEPS IN THE SAME ORDER FOR THE SMOOTH INSTALLATION
The setup used was :
SYSTEM : Two E-4500 with 2 * I/O boards / 2 * DWSI / 2 * GBIC(FCAL) / 1 *
QFE
Storage : D1000 and A5200 ( one for each server)
o/s Solaris 2.6 , Patch level 105181-22
Cluster volume manager CVM ver. 2.2.1
Sun Cluster SC ver. 2.2
The servers boot off the D1000, A5200 are shared between the servers
There is No NAFO Group as we have only one Qfe card.
Schematic Block diagram
[D1000]
| |
| |
c0 | | c1
|--------[SERVER] ------|
| hme0 hme1 | .......> Fiber loop
| | | |
| | | |
| | | |
[A5200] | | [A5200]
| | | |
| | | |
| hme0 hme1 |
|--------[SERVER]-------|
c0 | |c1
| |
| |
[D1000]
1.) Install Solaris and the Recommended Patches ONLY !!!!
Please note not to install any other utilities or any other shells or
GNU stuff
as you will have to spend time in setting the correct path etc etc ...
The OPS Cluster Scripts are written to Run in K-Shell ( i had a tough
time ..)
2.) Configure the UNIX kernel Interprocess Communication (IPC) parameters to
accommodate the Shared Global Area (SGA) structure of Oracle.
Example :
edit /etc/system and put the following entry
( these entries depend on the system memory, and database used. consult your
DBA)
set shmsys:shminfo_shmmax=4000000000
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=200
set shmsys:shminfo_shmseg=200
set semsys:seminfo_semmap=250
set semsys:seminfo_semmni=500
set semsys:seminfo_semmns=2010
set semsys:seminfo_semmnu=600
set semsys:seminfo_semume=600
set semsys:seminfo_semmsl=1000
3.) Add hosts entry on both the servers in /etc/hosts
4.) Put these entries in /etc/system for the cluster
*For CLUSTER - PLS DO NOT REMOVE
exclude:lofs
set ip: ip_enable_group_ifs=0
5.) Reboot all nodes.
6.) Set up the Oracle user, groups, environment and home directories
7.) Use the scinstall(1M) command to install Sun Cluster 2.2. Specify OPS
when prompted to select a data service, and use VxVM with the cluster
feature
enabled as the volume manager.
Example of the Scinstall script ...
-------------------------------------------------------------------------------------------
root@abcluster1:/tmp/suncluster_sc_2_2/Sun_Cluster_2_2/Sol_2.6/Tools 0#
./scinstall
Checking on installed package state
..........
None of the Sun Cluster software has been installed
<<Press return to continue>>
==== Install/Upgrade Software Selection Menu =======================
Upgrade to the latest Sun Cluster Server packages or select package
sets for installation. The list of package sets depends on the Sun
Cluster packages that are currently installed.
Choose one:
1) Upgrade Upgrade to Sun Cluster 2.2 Server packages
2) Server Install the Sun Cluster packages needed on a server
3) Client Install the admin tools needed on an admin workstation
4) Server and Client Install both Client and Server packages
5) Close Exit this Menu
6) Quit Quit the Program
Enter the number of the package set [6]: 2
What is the path to the CD-ROM image [/cdrom/cdrom0]:
/tmp/suncluster_sc_2_2/
Installing Server packages
< stuff deleted ....>
Install mode [manual automatic] [automatic]: Select Automatic
< stuff deleted >
Checking on installed package state
..........
Volume Manager Selection
Please choose the Volume Manager that will be used
on this node:
1) Cluster Volume Manager (CVM)
2) Sun StorEdge Volume Manager (SSVM)
3) Solstice DiskSuite (SDS)
Choose the Volume Manager: 1
---------WARNING---------
The Cluster Volume Manager (CVM) will need to be installed
before Oracle Parallel Database (OPS) can be started.
<<Press return to continue>>
What is the name of the cluster? ab-cluster
How many potential nodes will ab-cluster have [4]? 2
How many of the initially configured nodes will be active [2]? 2
What type of network interface will be used for this configuration
(ether|SCI)
[SCI]? ether
What is the hostname of node 0 [node0]? abcluster1
What is abcluster1's first private network interface [hme0]?
What is abcluster1's second private network interface [hme1]?
You will now be prompted for ethernet addresses of
the host. There is only one ethernet address for each host
regardless of the number of interfaces a host has. You can get
this information in one of several ways:
1. use the 'banner' command at the ok prompt,
2. use the 'ifconfig -a' command (need to be root),
3. use ping, arp and grep commands. ('ping exxon; arp -a | grep exxon')
Ethernet addresses are given as six hexadecimal bytes separated
by colons. (ie, 01:23:45:67:89:ab)
What is abcluster1's ethernet address? 08:00:20:XX:XX:XX
What is the hostname of node 1 [node1]? abcluster2
What is abcluster2's first private network interface [hme0]?
What is abcluster2's second private network interface [hme1]?
You will now be prompted for ethernet addresses of
the host. There is only one ethernet address for each host
regardless of the number of interfaces a host has. You can get
this information in one of several ways:
1. use the 'banner' command at the ok prompt,
2. use the 'ifconfig -a' command (need to be root),
3. use ping, arp and grep commands. ('ping exxon; arp -a | grep exxon')
Ethernet addresses are given as six hexadecimal bytes separated
by colons. (ie, 01:23:45:67:89:ab)
What is abcluster2's ethernet address? 08:00:20:XX:XX:XX
Will this cluster support any HA data services (yes/no) [yes]? yes
Okay to set up the logical hosts for those HA services now (yes/no) [yes]?
no
Performing Quorum Selection
Checking node status...
Checking host abcluster2 ...abcluster2.XYZ.com is alive
One of the specified hosts is either unreachable or permissions
are not set up or the appropriate software has not been installed
on it. In this situation, it is not possible to determine the set
of devices attached to both the hosts.
Note that both private and shared devices for this host will be
displayed in this node and the administrator must exercise extreme
caution in choosing a suitable quorum device.
Getting device information for host abcluster1
This may take a few seconds to a few minutes...done
Select quorum device for abcluster1 and abcluster2.
Type the number corresponding to the desired selection.
For example: 1
1) DISK:c0t0d0s2:0003B13198 14) DISK:c0t26d0s2:0003B3088527)
DISK:c3t33d0s2:000191955040) DISK:c3t51d0s2:0003B37909
2) DISK:c0t10d0s2:0003A2824915) DISK:c0t2d0s2:0003A96520 28)
DISK:c3t34d0s2:000194352741) DISK:c3t52d0s2:0003B31175
3) DISK:c0t16d0s2:000393240616) DISK:c0t3d0s2:0003B35054 29)
DISK:c3t35d0s2:0001A1271742) DISK:c3t53d0s2:0003B34390
4) DISK:c0t17d0s2:0003B0238617) DISK:c0t4d0s2:0003B32145 30)
DISK:c3t36d0s2:000194060743) DISK:c3t54d0s2:0003A88504
5) DISK:c0t18d0s2:0003B2215318) DISK:c0t5d0s2:0003B35768 31)
DISK:c3t37d0s2:000194181144) DISK:c3t55d0s2:0003A90841
6) DISK:c0t19d0s2:0003B1565319) DISK:c0t6d0s2:0003A95311 32)
DISK:c3t38d0s2:000194600745) DISK:c3t56d0s2:0003B30606
7) DISK:c0t1d0s2:0003B32528 20) DISK:c0t7d0s2:0003A74375 33)
DISK:c3t39d0s2:000194527946) DISK:c3t57d0s2:0003B35124
8) DISK:c0t20d0s2:0003B2941921) DISK:c0t8d0s2:0003B17793 34)
DISK:c3t40d0s2:000192044747) DISK:c3t58d0s2:0003B20026
9) DISK:c0t21d0s2:0003B2419222) DISK:c0t9d0s2:0003B10212 35)
DISK:c3t41d0s2:000194319348) DISK:c4t3d0s2:9948433427
10) DISK:c0t22d0s2:0003A8852523) DISK:c2t10d0s2:000247689036)
DISK:c3t42d0s2:000194066649) DISK:c4t4d0s2:0022422732
11) DISK:c0t23d0s2:0003B2742124) DISK:c2t8d0s2:9948434305 37)
DISK:c3t48d0s2:0003B3904950) DISK:c4t5d0s2:0002476791
12) DISK:c0t24d0s2:0003B1428325) DISK:c2t9d0s2:9948432090 38)
DISK:c3t49d0s2:0003B46831
13) DISK:c0t25d0s2:0003B2716926) DISK:c3t32d0s2:000191841139)
DISK:c3t50d0s2:0003A37373
Quorum device: 13
Disk c0t25d0s2 with serial id 0003B27169 has been chosen
as the quorum device.
Finished Quorum Selection
( Please note if the quorum disks dosent show up then we can configure it
later on
There is no need to panic..)
Installing ethernet Network Interface packages.
What is the path to the CD-ROM image [/tmp/suncluster_sc_2_2/]:
Installing the following packages: SUNWsma
< stuff deleted ..>
Installation of <SUNWsma> was successful.
Checking on installed package state
..........
..........
==== Select Data Services Menu ==========================
Please select which of the following data services
are to be installed onto this cluster. Select singly,
or in a space separated list.
Note: Sun Cluster HA for NFS and Sun Cluster for Informix XPS
are installed automatically with the Server Framework.
You may de-select a data service by selecting it
a second time.
Select DONE when finished selecting the configuration.
1) Sun Cluster HA for Oracle
2) Sun Cluster HA for Informix
3) Sun Cluster HA for Sybase
4) Sun Cluster HA for Netscape
5) Sun Cluster HA for Netscape LDAP
6) Sun Cluster HA for Lotus
7) Sun Cluster HA for Tivoli
8) Sun Cluster HA for SAP
9) Sun Cluster HA for DNS
10) Sun Cluster for Oracle Parallel Server
INSTALL 11) No Data Services
12) DONE
Choose a data service: 10
==== Select Data Services Menu ==========================
Please select which of the following data services
are to be installed onto this cluster. Select singly,
or in a space separated list.
Note: Sun Cluster HA for NFS and Sun Cluster for Informix XPS
are installed automatically with the Server Framework.
You may de-select a data service by selecting it
a second time.
Select DONE when finished selecting the configuration.
1) Sun Cluster HA for Oracle
2) Sun Cluster HA for Informix
3) Sun Cluster HA for Sybase
4) Sun Cluster HA for Netscape
5) Sun Cluster HA for Netscape LDAP
6) Sun Cluster HA for Lotus
7) Sun Cluster HA for Tivoli
8) Sun Cluster HA for SAP
9) Sun Cluster HA for DNS
INSTALL 10) Sun Cluster for Oracle Parallel Server
11) No Data Services
12) DONE
Choose a data service: 12
What is the path to the CD-ROM image [/tmp/suncluster_sc_2_2/]:
Installing Data Service packages.
< stuff deleted >
Install mode [manual automatic] [automatic]: Select automatic
< stuff Deleted>
Checking on installed package state
....................
============ Main Menu =================
1) Install/Upgrade - Install or Upgrade Server
Packages or Install Client Packages.
2) Remove - Remove Server or Client Packages.
3) Change - Modify cluster or data service configuration
4) Verify - Verify installed package sets.
5) List - List installed package sets.
6) Quit - Quit this program.
7) Help - The help screen for this menu.
Please choose one of the menu items: [7]: 6
==== Verify Package Installation ==========================
Installation
All of the install packages have been installed
Framework
None of the client packages have been installed
All of the server packages have been installed
Communications
All of the SMA packages have been installed
Data Services
All of the Sun Cluster HA for Oracle packages have been installed
None of the Sun Cluster HA for Informix packages have been installed
None of the Sun Cluster HA for Sybase packages have been installed
None of the Sun Cluster HA for Netscape packages have been installed
None of the Sun Cluster HA for Netscape LDAP packages have been
installed
None of the Sun Cluster HA for Lotus packages have been installed
None of the Sun Cluster HA for Tivoli packages have been installed
None of the Sun Cluster HA for SAP packages have been installed
None of the Sun Cluster HA for DNS packages have been installed
None of the Sun Cluster for Oracle Parallel Server packages have been
installed
root@abcluster1:/tmp/suncluster_sc_2_2/Sun_Cluster_2_2/Sol_2.6/Tools 0#
#
8). Reboot all nodes.
9). Install the ORCLudlm package on all nodes. This package is located at on
the Oracle product CD-ROM, in the ops_patch directory.
It is just a pkgadd command and when it prompts for the group please
select the default group "dba"
10). On all nodes, install VERITAS Volume Manager (VxVM) with the cluster
feature enabled. ( Cluster Volume manager) DoNOT forget to install the
CVM patch cluster ( 107958-06.tar.Z)
11). Reboot all nodes.
# vxdctl license must show this output else the patches have not been
applied
# vxdctl license
All features are available:
Mirroring
Concatenation
Disk-spanning
Striping
RAID-5
VxSmartSync
12). Create the VERITAS root disk group (rootdg). Rootdisk Encapsulation
Change the owner:group for the raw partitions
Creat Diskgroup and initialize disks creat spare disks
( DO NOT INITIALIZE CCD DISKS)
# vxdiskadd disk1, disk2 ...
Creat Volumes
Example:
vxassist -g oracledg make <volume> <size>m alloc="oracled09"
vxassist -g oracledg make <volume> <size>m layout=stripe alloc="oracled14
oracled18"
Mirror the Volumes
# vxassist -g oracledg mirror <volume> layout=stripe, alloc="oracled25
oracled26 oracled27 oracled38 oracled39"
Change permissions on the Volumes ( raw partitions)
# vxedit -g oracledg set user=oracle group=dba mode=0600 <volume name>
13). Start the cluster on one node only.
# /opt/SUNWcluster/bin/scadmin startcluster <nodename> <cluster name>
Ex:
#/opt/SUNWcluster/bin/scadmin startcluster abcluster1 ab-cluster
To check the working
# /opt/SUNWcluster/bin/get_node_status
14). Create Oracle disk groups and raw volumes for the OPS database. Deport
the
diskgroup and then import it with the shared option
# vxdg deport oracledg
# vxdg -s import oracledg
Now vxdisk list must show that the disks are shared.
15). Stop the cluster.
16). Restart the cluster on all nodes.
On the second node use the command
# /opt/SUNWcluster/bin/scadmin startnode
# /opt/SUNWcluster/bin/get_node_status
sc: included in running cluster
node id: 0
membership: 0 1
interconnect0: selected
interconnect1: up
vm_type: cvm
vm_on_node: master
vm: up
db: down
17.) Stop cluster on both the servers and Reboot
after reboot the shared oracledg or diskgroup dosent come up as the
clsuter would
have deported it.
WE HAVE TO START THE CLUSTER TO SEE THE SHARED DISK GROUP
18.) To get HA status
# /opt/SUNWcluster/bin/get_ha_status
HASTAT_CONFIG_STATE:
Configuration State on abcluster1: Stable
HASTAT_CONFIG_STATE:
HASTAT_CURRENT_MEMBERSHIP
abcluster1 is a cluster member
HASTAT_CURRENT_MEMBERSHIP
HASTAT_UPTIME_STATE:
uptime of abcluster1: 4:27pm up 22:56, 3 users, load
average: 0.01, 0.01, 0.01
HASTAT_UPTIME_STATE:
HASTAT_PRIV_NET_STATUS
Status of Interconnects on abcluster1:
interconnect0: selected
interconnect1: up
Status of private nets on abcluster1:
To abcluster1 - UP
To abcluster2 - UP
HASTAT_PRIV_NET_STATUS
HASTAT_LOGICAL_HOSTS_MASTERED
Logical Hosts Mastered on abcluster1:
None
Logical Hosts for which abcluster1 is Backup Node:
None
HASTAT_LOGICAL_HOSTS_MASTERED
HASTAT_PUBLIC_NET_STATUS
Status of Public Network On abcluster1:
HASTAT_PUBLIC_NET_STATUS
HASTAT_SERVICE_STATUS
Status Of Data Services Running On abcluster1
None running.
HASTAT_SERVICE_STATUS
HASTAT_RECENT_ERR_MSGS
Recent Error Messages on abcluster1
Sep 20 14:18:54 abcluster1 ftpd[3431]: pam_authenticate: error
Authentication failed
Sep 20 14:19:01 abcluster1 sshd[3440]: log: Connection from 10.1.67.170 port
1018
Sep 20 14:19:01 abcluster1 sshd[3440]: log: Could not reverse map address
10.1.67.170.
Sep 20 14:33:26 abcluster1 sshd[816]: log: Generating new 768 bit RSA key.
ep 20 15:33:31 abcluster1 sshd[816]: log: RSA key generation complete.
HASTAT_RECENT_ERR_MSGS
hastat:over
#
---------------------------------------------------------------------------------
CHECKING THE CLUSTER AND CONFIGURING THE QUORUM DEVICE
#/opt/SUNWcluster/bin# ./scconf ab-cluster -p
( scconf <cluster-name> -p )
Checking node status...
Current Configuration for Cluster arb-cluster
Hosts in cluster: abcluster1 abcluster2
Private Network Interfaces for
abcluster1: hme0 hme1
abcluster2: hme0 hme1
Quorum Device Information
Logical Host Timeout Value :
Step10 :720
Step11 :720
Logical Host :180
#
As we do not see any quorum device we have to configure it
CONFIGURING QUORUM DEVICE
#/opt/SUNWcluster/bin# ./scconf ab-cluster -q abcluster1 abcluster2
( scconf <cluster-name> -q nodename1 nodename2 )
Checking node status...
Checking host abcluster2 ...abcluster2 is alive
One of the specified hosts is either unreachable or permissions
are not set up or the appropriate software has not been installed
on it. In this situation, it is not possible to determine the set
of devices attached to both the hosts.
Note that both private and shared devices for this host will be
displayed in this node and the administrator must exercise extreme
caution in choosing a suitable quorum device.
Getting device information for host arbcluster1
This may take a few seconds to a few minutes...done
Select quorum device for abcluster1 and abcluster2.
Type the number corresponding to the desired selection.
For example: 1
1) DISK:c0t0d0s2:0003B13198 14) DISK:c0t26d0s2:0003B3088527)
DISK:c3t33d0s2:000191955040) DISK:c3t51d0s2:0003B37909
2) DISK:c0t10d0s2:0003A2824915) DISK:c0t2d0s2:0003A96520 28)
DISK:c3t34d0s2:000194352741) DISK:c3t52d0s2:0003B31175
3) DISK:c0t16d0s2:000393240616) DISK:c0t3d0s2:0003B35054 29)
DISK:c3t35d0s2:0001A1271742) DISK:c3t53d0s2:0003B34390
4) DISK:c0t17d0s2:0003B0238617) DISK:c0t4d0s2:0003B32145 30)
DISK:c3t36d0s2:000194060743) DISK:c3t54d0s2:0003A88504
5) DISK:c0t18d0s2:0003B2215318) DISK:c0t5d0s2:0003B35768 31)
DISK:c3t37d0s2:000194181144) DISK:c3t55d0s2:0003A90841
6) DISK:c0t19d0s2:0003B1565319) DISK:c0t6d0s2:0003A95311 32)
DISK:c3t38d0s2:000194600745) DISK:c3t56d0s2:0003B30606
7) DISK:c0t1d0s2:0003B32528 20) DISK:c0t7d0s2:0003A74375 33)
DISK:c3t39d0s2:000194527946) DISK:c3t57d0s2:0003B35124
8) DISK:c0t20d0s2:0003B2941921) DISK:c0t8d0s2:0003B17793 34)
DISK:c3t40d0s2:000192044747) DISK:c3t58d0s2:0003B20026
9) DISK:c0t21d0s2:0003B2419222) DISK:c0t9d0s2:0003B10212 35)
DISK:c3t41d0s2:000194319348) DISK:c4t4d0s2:0022422732
10) DISK:c0t22d0s2:0003A8852523) DISK:c2t10d0s2:000247689036)
DISK:c3t42d0s2:000194066649) DISK:c4t5d0s2:0002476791
11) DISK:c0t23d0s2:0003B2742124) DISK:c2t8d0s2:9948434305 37)
DISK:c3t48d0s2:0003B39049
12) DISK:c0t24d0s2:0003B1428325) DISK:c2t9d0s2:9948432090 38)
DISK:c3t49d0s2:0003B46831
13) DISK:c0t25d0s2:0003B2716926) DISK:c3t32d0s2:000191841139)
DISK:c3t50d0s2:0003A37373
Quorum device: 13
Disk c0t25d0s2 with serial id 0003B27169 has been chosen
as the quorum device.
Finished Quorum Selection
Now we will be able to see the Quorum device
Checking node status...
Current Configuration for Cluster ab-cluster
Hosts in cluster: arbcluster1 abcluster2
Private Network Interfaces for
abcluster1: hme0 hme1
abcluster2: hme0 hme1
Quorum Device Information
Quorum device for hosts abcluster1 and abcluster2: 0003B27169
Logical Host Timeout Value :
Step10 :720
Step11 :720
Logical Host :180
-----------------------------------------------------------------------------------
To configure shared CCD device
execute these commands on both the servers while the cluster is up and
running
# /opt/SUNWcluster/bin/scconf ab-cluster -S ccdvol
Checking node status...
Purified ccd file written to
/etc/opt/SUNWcluster/conf/ccd.database.init.pure
There were 0 errors found.
#
Please note there is no such file ccd.database.init.pure even it is says
so.. (BUG)
To Configure the Shared CCD ..
# /opt/SUNWcluster/bin/confccdssa ab-cluster
The disk group sc_dg does not exist.
Will continue with the sc_dg setup.
On a 2-node configured cluster you may select two disks
that are shared between the 2 nodes to store the CCD
database in case of a single node failure.
Please, select the disks you want to use from the following list:
Select devices from list.
Type the number corresponding to the desired selection.
For example: 1<CR>
1) DISK:c0t25d0s2:0003B27169
2) DISK:c2t10d0s2:0002476890
3) DISK:c3t57d0s2:0003B35124
4) DISK:c4t5d0s2:0002476791
Device 1: 1
Disk c0t25d0s2 with serial id 0003B27169 has been selected
as device 1.
Select devices from list.
Type the number corresponding to the desired selection.
For example: 1<CR>
1) DISK:c2t10d0s2:0002476890
2) DISK:c3t57d0s2:0003B35124
3) DISK:c4t5d0s2:0002476791
Device 2: 2
Disk c3t57d0s2 with serial id 0003B35124 has been selected
as device 2.
newfs: construct a new file system /dev/vx/rdsk/sc_dg/ccdvol: (y/n)? y
Warning: 480 sector(s) in last cylinder unallocated
/dev/vx/rdsk/sc_dg/ccdvol: 20000 sectors in 10 cylinders of 32 tracks,
64 sectors
9.8MB in 1 cyl groups (16 c/g, 16.00MB/g, 7680 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32,
#
NOTE:
After the cluster is brought down and up again the ccd will be mounted on
one node
/dev/vx/dsk/sc_dg/ccdvol
9007 17 8090 0%
/etc/opt/SUNWcluster/conf/ccdssa
Also the vxdisk list will show
.
.
.
<stuff deleted>
c0t23d0s2 sliced oracled19 oracledg online shared
c0t24d0s2 sliced oracled20 oracledg online shared
c0t25d0s2 sliced Combo1@25.0 sc_dg online
c0t26d0s2 sliced oracled41 oracledg online shared spare
.
<stuff deleted>
.
.
c3t55d0s2 sliced oracled39 oracledg online shared
c3t56d0s2 sliced oracled40 oracledg online shared
c3t57d0s2 sliced Combo2@57.0 sc_dg online
c3t58d0s2 sliced oracled42 oracledg online shared spare
.
<stuff deleted>
-------------------------------------------------------------------------------------------
Glance of the system :
vxdisk list :
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 sliced oracled01 oracledg online shared
c0t1d0s2 sliced oracled02 oracledg online shared
c0t2d0s2 sliced oracled03 oracledg online shared
c0t3d0s2 sliced oracled04 oracledg online shared
c0t4d0s2 sliced oracled05 oracledg online shared
c0t5d0s2 sliced oracled06 oracledg online shared
c0t6d0s2 sliced oracled07 oracledg online shared
c0t7d0s2 sliced oracled08 oracledg online shared
c0t8d0s2 sliced oracled09 oracledg online shared
c0t9d0s2 sliced oracled10 oracledg online shared
c0t10d0s2 sliced oracled11 oracledg online shared
c0t16d0s2 sliced oracled12 oracledg online shared
c0t17d0s2 sliced oracled13 oracledg online shared
c0t18d0s2 sliced oracled14 oracledg online shared
c0t19d0s2 sliced oracled15 oracledg online shared
c0t20d0s2 sliced oracled16 oracledg online shared
c0t21d0s2 sliced oracled17 oracledg online shared
c0t22d0s2 sliced oracled18 oracledg online shared
c0t23d0s2 sliced oracled19 oracledg online shared
c0t24d0s2 sliced oracled20 oracledg online shared
c0t25d0s2 sliced Combo1@25.0 sc_dg online
c0t26d0s2 sliced oracled41 oracledg online shared spare
c2t8d0s2 sliced rootdisk rootdg online
c2t9d0s2 sliced orahome01 orahome online
c2t10d0s2 sliced - - error
c3t32d0s2 sliced oracled21 oracledg online shared
c3t33d0s2 sliced oracled22 oracledg online shared
c3t34d0s2 sliced oracled23 oracledg online shared
c3t35d0s2 sliced oracled24 oracledg online shared
c3t36d0s2 sliced oracled25 oracledg online shared
c3t37d0s2 sliced oracled26 oracledg online shared
c3t38d0s2 sliced oracled27 oracledg online shared
c3t39d0s2 sliced oracled28 oracledg online shared
c3t40d0s2 sliced oracled29 oracledg online shared
c3t41d0s2 sliced oracled30 oracledg online shared
c3t42d0s2 sliced oracled31 oracledg online shared
c3t48d0s2 sliced oracled32 oracledg online shared
c3t49d0s2 sliced oracled33 oracledg online shared
c3t50d0s2 sliced oracled34 oracledg online shared
c3t51d0s2 sliced oracled35 oracledg online shared
c3t52d0s2 sliced oracled36 oracledg online shared
c3t53d0s2 sliced oracled37 oracledg online shared
c3t54d0s2 sliced oracled38 oracledg online shared
c3t55d0s2 sliced oracled39 oracledg online shared
c3t56d0s2 sliced oracled40 oracledg online shared
c3t57d0s2 sliced Combo2@57.0 sc_dg online
c3t58d0s2 sliced oracled42 oracledg online shared spare
c4t3d0s2 sliced rootdisk2 rootdg online
c4t4d0s2 sliced orahome02 orahome online
c4t5d0s2 sliced - - error
# vxdg list
NAME STATE ID
rootdg enabled 969313189.1025.abcluster1.XYZ.com
oracledg enabled,shared 968779293.1629.abcluster1
orahome enabled 969377297.1488.abcluster1.XYZ.com
sc_dg enabled 969397558.1566.abcluster1.XYZ.com
---------------------------------------------------------------------------------
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
S
U BEFORE POSTING please READ the FAQ located at
N ftp://ftp.cs.toronto.edu/pub/jdd/sun-managers/faq
. and the list POLICY statement located at
M ftp://ftp.cs.toronto.edu/pub/jdd/sun-managers/policy
A To submit questions/summaries to this list send your email message to:
N sun-managers@sunmanagers.ececs.uc.edu
A To unsubscribe from this list please send an email message to:
G majordomo@sunmanagers.ececs.uc.edu
E and in the BODY type:
R unsubscribe sun-managers
S Or
. unsubscribe sun-managers original@subscription.address
L To view an archive of this list please visit:
I http://www.latech.edu/sunman.html
S
T
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:18 CDT